Profile
-
Dr. Gari was born in Reyadh, the capitol of Saudi Arabia.
-
He lived 5 years there, one year in Jeddah, then one year in Pennsylvania, USA where he studied his first grade at an elementary school.
-
He lived in Jeddah until he finished his Bachelor's degree from King Abdulaziz University (KAU).
-
He studied at Jeel Alfaisal (Faisal generation) elementary school, Albahr alahmar (Red Sea) middle school, and alfath (The opening) secondary school.
-
He graduated from Thermal Engineering department in 1994. Afterwards, he worked for 1.5 years at KAU in a teaching assistant position. Later travelled abroad in December of 1996 to pursue his hiegher education career.
-
He got his M.Sc. from Oklahoma State University (OSU) in December 1999 and his Ph.D. from University of South Florida (USF) in July 2006
-
He went back to his hometown and worked at KAU as an Assistant Professor in the Thermal Engineering department (the same department he graduated from) in October 2006.
Education
- 1996
Bachelor degree from Mechanical - ThermalEngineering, King Abdulaziz University, جدة, المملكة العربية السعودية
- 2000
Master degree from Aerospace and MechanicalEngineering, Oklahoma State University, ستيلووتر, امــريــكـا
- 2006
Doctorate degree from MechanicalEngineering, University of South Florida, تامبا, امــريــكـا
Employment
- 1995-1996
Teacher Assistant, King Abdulaziz University, جدة, المملكة العربية السعودية
- 1996-2006
Graduate Student under a Governmental Grant, Oklahoma - Florida, , امــريــكـا
- 2006-حاليا
Assistant Professor, king Abdulaziz University, جدة, المملكة العربية السعودية
Research Interests
-
Microchannels Heat Exchangers
-
Airconditiong Systems - Thermal Storage Systems
-
Nanofluids and Nanoparticles
-
Snow Melting Systems
Published / Accepted Journal Papers
- Gari, Abdullatif A. "AN EMPIRICAL EQUATION FOR NUSSELT NUMBER BETWEEN THE TWO CLASSICAL LAMINAR PIPE FLOW BOUNDARY CONDITIONS." (2008).
- Rahman, Muhammad M., Abdullatif A. Gari, and Shantanu Shevade. "Heat transfer in circular microchannels during volumetric heating with magnetic field." Heat and mass transfer 44, no. 4 (2008): 463-472.
- Khaled, A-RA, and A. Gari. "Analysis of heat transfer inside wall-joint-fins systems." Journal of Mechanical Science and Technology 27, no. 8 (2013): 2523-2535.
- Hamza, Mohamed, and Abdullatif A. Gari. "Numerical heat transfer and pressure drop investigation of different height baffles mounted simultaneously in a 2-D channel." Life Science Journal 10, no. 2 (2013).
- Khaled, Abdul Rahim A., and Abdullatif A. Gari. "Heat transfer enhancement via combined wall and triangular rooted-fin system." Journal of Electronics Cooling and Thermal Control 2014 (2014).
- Abu-Hamdeh, Nidal H., Khalid H. Almitani, Abdullatif A. Gari, Ashkan Alimoradi, and Rasool Kalbasi. "Evaluation of a tube equipped with different inserts: competition between improvements in heat transfer versus increase in pressure drop." Journal of Thermal Analysis and Calorimetry 144, no. 6 (2021): 2665-2673.
- Abu-Hamdeh, Nidal H., Khalid H. Almitani, Abdullatif A. Gari, Ashkan Alimoradi, Ali Ahmadian, and Dumitru Baleanu. "Hydrodynamic analysis of a heat exchanger with crosscut twisted tapes and filled with thermal oil-based SWCNT nanofluid: applying ANN for prediction of objective parameters." Journal of Thermal Analysis and Calorimetry (2021): 1-14.
- Abu-Hamdeh, Nidal H., Khalid H. Almitani, Abdullatif A. Gari, Ashkan Alimoradi, and Chuan Sun. "FVM method based on K− ε model to simulate the turbulent convection of nanofluid through the heat exchanger porous media." Journal of Thermal Analysis and Calorimetry (2021): 1-10.
- Gari, Abdullatif A., Khaled I. Ahmed, and Mohamed H. Ahmed. "Performance and thermal stress of tubular functionally graded solid oxide fuel cells." Energy Reports 7 (2021): 6413-6421.
- Khetib, Yacine, Khaled Sedraoui, and Abdulataif Gari. "Improving thermal conductivity of a ferrofluid-based nanofluid using Fe3O4-challenging of RSM and ANN methodologies." Chemical Engineering Communications (2021): 1-12.
- Khetib, Yacine, Abdulataif Gari, and Rasool Kalbasi. "Introducing two scenarios to reduce building energy usage: PCM installation and integrating nanofluid solar collectors with DHW system." Journal of the Taiwan Institute of Chemical Engineers 128 (2021): 327-337.
- Khetib, Yacine, Khaled Sedraoui, and Abdellataif Gari. "Numerical study of the effects of pin geometry and configuration in micro-pin-fin heat sinks for turbulent flows." Case Studies in Thermal Engineering 27 (2021): 101243.
- Khetib, Yacine, Abdeslam-Hassen Meniai, Abdellataif Gari, and Khaled Sedraoui. "Refrigerants design for an absorption refrigeration machine using group contribution methods." Chemical Engineering Communications (2021): 1-19.
Published Conference Papers
- Rahman, Muhammad, and Abdul Gari. "Conjugate Heat Transfer Analysis for Fin Filled with Liquid Metal." In 2nd International Energy Conversion Engineering Conference, p. 5513. 2004.
- Rahman, Muhammad, Abdullatif Gari, and Shantanu Shevade. "Thermal Management Using Circular Microchannels During Magnetic Heating or Cooling." In 3rd International Energy Conversion Engineering Conference, p. 5731. 2005.
- Gari, Abdullatif A., and Muhammad M. Rahman. "Conjugate Heat Transfer Analysis of Circular Microtube Under Time Varying Heat Source." In ASME International Mechanical Engineering Congress and Exposition, vol. 42223, pp. 663-668. 2005.
- Gari, Abdullatif A. "Parametric Study for Two-Dimensional Rectangular Composite Microchannel With Heat Flux Boundary Condition." In International Conference on Nanochannels, Microchannels, and Minichannels, vol. 48345, pp. 1357-1361. 2008.
- Gari, Abdullatif A. “2-D Parametric Study for a Pipe with Heat Generation and Outer Insulation Exposed to Inner and Outer Convection Boundary Conditions.” In International Conference on Innovative Technologies, IN-TECH 2018, Zagreb, 5. - 7. 9. 2018
Courses
| Thermodynamics |
261 |
MEP |
| Fluid Dynamics |
290 |
MEP |
| Heat Transfer |
360 |
MEP |
| Thermodynamics 2 |
361 |
MEP |
| Thermal Measurements |
365 |
MEP |
| Design of Heat Exchangers |
460 |
MEP |
Areas of expertise
| Creative Thinking and Problem Solving, Pittsburgh, USA |
|
| LMI: Effective Personal Productivity |
|
| LMI: Effective Personal Leadership |
|
| Six steps for effective student evaluation |
|
| Boosting Patent with the right procedure |
|
| King Abdulaziz University |
|