الشهادات العلمية

• 1996

  درجة البكالوريوس من الميكانيكية - الحراريةالهندسة, جامعة الملك عبدالعزيز, جدة, المملكة العربية السعودية

• 2000

  درجة الماجستير من الميكانيكية والطيرانالهندسة, جامعة ولاية أوكلاهوما, ستيلووتر, امــريــكـا

• 2006

  درجة الدكتوراة من الميكانيكيةالهندسة, جامعة جنوب فلوريدا, تامبا, امــريــكـا

الخبرات السابقة

• 1995-1996

  معيد, جامعة الملك عبدالعزيز, جدة, المملكة العربية السعودية

• 1996-2006

  طالب مبتعث بمنحة حكومية, أوكلاهوما - فلوريدا, , امــريــكـا

• 2006-حاليا

  أستاذ مساعد, جامعة الملك عبدالعزيز, جدة, المملكة العربية السعودية

الاهتمامات البحثية

المبادلات الحرارية للقنوات الدقيقة
أنظمة تكييف الهواء - أنظمة التخزين الحراري
الموائع النانوية والجسيمات النانوية
أنظمة ذوبان الجليد

Published / Accepted Journal Papers

• Gari, Abdullatif A. "AN EMPIRICAL EQUATION FOR NUSSELT NUMBER BETWEEN THE TWO CLASSICAL LAMINAR PIPE FLOW BOUNDARY CONDITIONS." (2008).
• Rahman, Muhammad M., Abdullatif A. Gari, and Shantanu Shevade. "Heat transfer in circular microchannels during volumetric heating with magnetic field." Heat and mass transfer 44, no. 4 (2008): 463-472.
• Khaled, A-RA, and A. Gari. "Analysis of heat transfer inside wall-joint-fins systems." Journal of Mechanical Science and Technology 27, no. 8 (2013): 2523-2535.
• Hamza, Mohamed, and Abdullatif A. Gari. "Numerical heat transfer and pressure drop investigation of different height baffles mounted simultaneously in a 2-D channel." Life Science Journal 10, no. 2 (2013).
• Khaled, Abdul Rahim A., and Abdullatif A. Gari. "Heat transfer enhancement via combined wall and triangular rooted-fin system." Journal of Electronics Cooling and Thermal Control 2014 (2014).
• Abu-Hamdeh, Nidal H., Khalid H. Almitani, Abdullatif A. Gari, Ashkan Alimoradi, and Rasool Kalbasi. "Evaluation of a tube equipped with different inserts: competition between improvements in heat transfer versus increase in pressure drop." Journal of Thermal Analysis and Calorimetry 144, no. 6 (2021): 2665-2673.
• Abu-Hamdeh, Nidal H., Khalid H. Almitani, Abdullatif A. Gari, Ashkan Alimoradi, Ali Ahmadian, and Dumitru Baleanu. "Hydrodynamic analysis of a heat exchanger with crosscut twisted tapes and filled with thermal oil-based SWCNT nanofluid: applying ANN for prediction of objective parameters." Journal of Thermal Analysis and Calorimetry (2021): 1-14.
• Abu-Hamdeh, Nidal H., Khalid H. Almitani, Abdullatif A. Gari, Ashkan Alimoradi, and Chuan Sun. "FVM method based on K− ε model to simulate the turbulent convection of nanofluid through the heat exchanger porous media." Journal of Thermal Analysis and Calorimetry (2021): 1-10.
• Gari, Abdullatif A., Khaled I. Ahmed, and Mohamed H. Ahmed. "Performance and thermal stress of tubular functionally graded solid oxide fuel cells." Energy Reports 7 (2021): 6413-6421.
• Khetib, Yacine, Khaled Sedraoui, and Abdulataif Gari. "Improving thermal conductivity of a ferrofluid-based nanofluid using Fe3O4-challenging of RSM and ANN methodologies." Chemical Engineering Communications (2021): 1-12.
• Khetib, Yacine, Abdulataif Gari, and Rasool Kalbasi. "Introducing two scenarios to reduce building energy usage: PCM installation and integrating nanofluid solar collectors with DHW system." Journal of the Taiwan Institute of Chemical Engineers 128 (2021): 327-337.
• Khetib, Yacine, Khaled Sedraoui, and Abdellataif Gari. "Numerical study of the effects of pin geometry and configuration in micro-pin-fin heat sinks for turbulent flows." Case Studies in Thermal Engineering 27 (2021): 101243.
• Khetib, Yacine, Abdeslam-Hassen Meniai, Abdellataif Gari, and Khaled Sedraoui. "Refrigerants design for an absorption refrigeration machine using group contribution methods." Chemical Engineering Communications (2021): 1-19.

Published Conference Papers

• Rahman, Muhammad, and Abdul Gari. "Conjugate Heat Transfer Analysis for Fin Filled with Liquid Metal." In 2nd International Energy Conversion Engineering Conference, p. 5513. 2004.
• Rahman, Muhammad, Abdullatif Gari, and Shantanu Shevade. "Thermal Management Using Circular Microchannels During Magnetic Heating or Cooling." In 3rd International Energy Conversion Engineering Conference, p. 5731. 2005.
• Gari, Abdullatif A., and Muhammad M. Rahman. "Conjugate Heat Transfer Analysis of Circular Microtube Under Time Varying Heat Source." In ASME International Mechanical Engineering Congress and Exposition, vol. 42223, pp. 663-668. 2005.

• Gari, Abdullatif A. "Parametric Study for Two-Dimensional Rectangular Composite Microchannel With Heat Flux Boundary Condition." In International Conference on Nanochannels, Microchannels, and Minichannels, vol. 48345, pp. 1357-1361. 2008.
•  Gari, Abdullatif A. “2-D Parametric Study for a Pipe with Heat Generation and Outer Insulation Exposed to Inner and Outer Convection Boundary Conditions.” In International Conference on Innovative Technologies, IN-TECH 2018, Zagreb, 5. - 7. 9. 2018

الاهتمامات العلمية

المواد والمحاضرات

مجالات الخبرة